Using AI, the laser engraving machine can automatically identify the material

Using AI, the laser engraving machine can automatically identify the material and judge the engraving force with 98% accuracy

Recently, an interesting study was published:

With its AI capabilities, laserpecker 12 the laser engraving machine can carve on T-shirts made of mixed materials and automatically change the force to prevent cutting.

On the existing laser engraving machine, laserpecker metal engraving they installed their own AI, which recognizes 30 different cutting technology materials with 98% accuracy.

Not only will it tell you what it is, but it will also tell you how fast and hard to cut/carve it.

Obviously, if this is a dangerous material, just throw a big "be careful" at you.

In this way, there is no risk of human error (especially if the material is not mislabeled), such as toxic gases, and the cutting strength won't damage the waste.

In the case of three transparent plastic materials that look identical, which is suitable for making a protective mask?

Give it to the AI! Brush a few times, the students' three analyses are clearly not in vain:

Right is polycarbonate, a dangerous material that cannot be cut (cutting can produce toxic fumes);

The middle is made of cast propylene, which can be cut with a laser, but cannot be wiped with alcohol;

A clear sheet of plastic acetate can be rinsed with warm water and mild soap or alcohol on the far left.

As for a lab mask, choose the leftmost one. Accept and complete it as follows:

Cover image in GIF

Additionally, the SensiCut AI can be used to analyze laser engraving patterns for debugging:

Enter the thickness of each felt piece, and Sensicut will tell you immediately if the felt is too thin and the pattern design is too complicated.

Before carving, you can make it bigger.

If you don't adjust as it says, it will be a drag:

Additionally, laser-assisted engraving of patterns can be performed on materials such as mobile phone cases and mixed-material clothes.

This is also another strong point of it, since the traditional Chinese method of studying laser engraving on composite structural materials requires data splitting and boundary alignment of their own design problems.

Did you find this feeling cut useful along the way

laser engraving machine concept is clear

0